Starting Tacacs+ Accounting - Cisco WS-C2950-24 Configuration Manual

Configuring TACACS+
Command
Step 1
configure terminal
Step 2
aaa authorization network
tacacs+
Step 3 aaa authorization exec tacacs+ Configure the switch for user TACACS+ authorization to
Step 4
exit

Starting TACACS+ Accounting

Command
Step 1
configure terminal
Step 2
aaa accounting exec start-stop
tacacs+
Step 3 aaa accounting network
start-stop tacacs+
Step 4
exit
Note
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
6-66
Beginning in privileged EXEC mode, follow these steps to specify TACACS+
authorization for EXEC access and network services:
Purpose
Enter global configuration mode.
Configure the switch for user TACACS+ authorization for
all network-related service requests, including SLIP, PPP
NCPs, and ARA protocols.
determine if the user is allowed EXEC access.
The exec keyword might return user profile information
(such as autocommand information).
Return to privileged EXEC mode.
You use the aaa accounting command with the tacacs+ keyword to turn on
TACACS+ accounting for each Cisco IOS privilege level and for network
services.
Beginning in privileged EXEC mode, follow these steps to enable TACACS+
accounting:
Purpose
Enter global configuration mode.
Enable TACACS+ accounting to send a start-record
accounting notice at the beginning of an EXEC process and
a stop-record at the end.
Enable TACACS+ accounting for all network-related
service requests, including SLIP, PPP, and PPP NCPs.
Return to privileged EXEC mode.
These commands are documented in the "Accounting and Billing Commands"
chapter of the Cisco IOS Release 12.0 Security Command Reference.
Chapter 6 Configuring the System
78-6511-05