Network Configuration Examples; Design Concepts For Using The Switch - Cisco Catalyst 2960 Software Configuration Manual

Chapter 1 Overview
•
•
•
Note
•
•
•
•
•
•

Network Configuration Examples

This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Fast Ethernet and Gigabit
Ethernet connections.
•
•
•

Design Concepts for Using the Switch

As your network users compete for network bandwidth, it takes longer to send and receive data. When
you configure your network, consider the bandwidth required by your network users and the relative
priority of the network applications that they use.
OL-26520-01
No secure ports are configured. For more information, see
–
Traffic Control."
CDP is enabled. For more information, see
UDLD is disabled. For more information, see
SPAN and RSPAN are disabled. For more information, see
RSPAN."
To use RSPAN, the switch must be running the LAN Base image.
RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
No ACLs are configured. For more information, see
with ACLs."
QoS is disabled. For more information, see
No EtherChannels are configured. For more information, see
EtherChannels and Link-State Tracking."
"Design Concepts for Using the Switch" section on page 1-19
"Small to Medium-Sized Network Using Catalyst 2960, 2960-S and 2960-C Switches" section on
page 1-24
"Long-Distance, High-Bandwidth Transport Configuration" section on page 1-25
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Network Configuration Examples
Chapter 23, "Configuring Port-Based
Chapter 25, "Configuring CDP."
Chapter 24, "Configuring UDLD."
Chapter 27, "Configuring SPAN and
Chapter 28, "Configuring RMON."
Chapter 30, "Configuring SNMP."
Chapter 31, "Configuring Network Security
Chapter 33, "Configuring QoS."
Chapter 38, "Configuring
Chapter 29,
1-19