Modifying The Startup Configuration - Cisco Catalyst 2960 Software Configuration Manual

Chapter 3 Assigning the Switch IP Address and Default Gateway
This example shows how to configure the NVRAM buffer size:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# boot buffersize 524288
Switch(config)# end
Switch# show boot
BOOT path-list
Config file
Private Config file : flash:/private-config.text
Enable Break
Manual Boot
HELPER path-list
Auto upgrade
Auto upgrade path
NVRAM/Config file
Timeout for Config
Config Download
Switch#

Modifying the Startup Configuration

These sections describe how to modify the switch startup configuration:
•
•
•
•
•
See also
Images,"
OL-26520-01
:
: flash:/config.text
: no
: no
:
: yes
:
buffer size: 524288
Download: 300 seconds
via DHCP: enabled (next boot: enabled)
Default Boot Configuration, page 3-18
Automatically Downloading a Configuration File, page 3-18
Booting Manually, page 3-19
Booting a Specific Software Image, page 3-20
Controlling Environment Variables, page 3-21
Appendix A, "Working with the Cisco IOS File System, Configuration Files, and Software
for information about switch configuration files.
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
Modifying the Startup Configuration
End with CNTL/Z.
3-17