Local Web Authentication Banner - Cisco Catalyst 2960 Software Configuration Manual

Understanding Web-Based Authentication

Local Web Authentication Banner

You can create a banner that will appear when you log in to a switch by using web authentication.
The banner appears on both the login page and the authentication-result pop-up pages.
•
•
•
You create a banner by using the ip admission auth-proxy-banner http global configuration command.
The default banner Cisco Systems and Switch host-name Authentication appear on the Login Page. Cisco
Systems appears on the authentication result pop-up page, as shown in
Figure 11-2
You can also customize the banner, as shown in
•
•
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
11-4
Authentication Successful
Authentication Failed
Authentication Expired
Authentication Successful Banner
Add a switch, router, or company name to the banner by using the ip admission auth-proxy-banner
http banner-text global configuration command.
Add a logo or text file to the banner by using the ip admission auth-proxy-banner http file-path
global configuration command.
Chapter 11 Configuring Web-Based Authentication
Figure
Figure 11-3.
11-2.
OL-26520-01