Kärcher HDS 13/20 De Tr1 Operating Manual page 32

Time
Prior to each drive
Daily
Once after the first 50 op-
erating hours
Every 50 operating hours Check battery.
Every 200 operating hours Check the air filter or air filter inlay, clean if necessary.
Every 400 operating hours Replace the air filter insert.
After 600 operating hours
or once a year
Every 600 operating hours Lubricate the overrun brake on the drawbar.
Every 800 operating hours Check the blower motor for proper function, replace sliding contacts (carbon brushes) if
After 1000 operating hours
or once a year
Every 1000 operating
hours
Every 1600 operating
hours
Every 2000 operating
hours or once every 2
years
Every 2000 operating
hours
32
Activity
Check the lighting.
Check the tyre pressure and their state.
Check the oil level at the oil container of the high-pressure pump, top up oil if necessary.
ATTENTION
In case of lacteous oil inform Kärcher customer service immediately
General visual inspection of the device.
Check the water filter and clean if necessary.
Check the fine filter on the pump head, clean if necessary.
Check oil level on the motor, refill oil if necessary.
Check oil level at the intermediate gear, refill oil if necessary.
Check the fuel filter on the motor, inform customer service if necessary.
Check the water separator on the motor, inform customer service if necessary.
Check coolant level in the equalisation container, refill coolant if needed.
Check fuel filter, contact customer service if necessary.
Check the filter on the detergent suction hose, clean if necessary.
Check pipes to see if there are any leaks.
Check the V-belt tension at the fan, retension if necessary.
Replace oil in the motor.
Replace oil filter inlay on motor.
Change the oil in the high pressure pump.
Check the V-belt tension at the fan, retension if necessary.
Check the intermediate gear for leaks.
Clean the sieve on the filling nozzle of the fuel tank.
Replace oil in the motor.
Replace oil filter inlay on motor.
Perform maintenance tasks in accordance with the maintenance plan.
Check fuel filter, replace if necessary.
Perform maintenance tasks in accordance with the maintenance plan.
Change the oil in the high pressure pump.
Perform maintenance tasks in accordance with the maintenance plan.
necessary.
Replace coolant.
Replace oil in the intermediate gear.
Replace V-belt on the ventilator.
Check the valve clearance at the cylinder head of the motor, adjust if necessary.
Check injectors on the motor, clean if necessary.
Check the crankshaft casing ventilation on the motor, clean if necessary.
Replace fuel hoses on the motor.
Replace cooling system hoses on the motor.
Check the valves and valve seats on the cylinder head of the motor, lap if necessary.
Maintenance intervals
12
-
EN
of whom
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Customer Service
Customer Service
Customer Service
Operator
Operator
Operator
Customer Service
Customer Service
Customer Service
Customer Service
Customer Service
Operator
Customer Service
Customer Service
Customer Service
Operator
Customer Service
Customer Service
Customer Service
Customer Service
Customer Service
authorized Yan-
mar dealer
authorized Yan-
mar dealer
authorized Yan-
mar dealer
authorized Yan-
mar dealer
authorized Yan-
mar dealer
authorized Yan-
mar dealer