Ftp Command Line Examples; Filename Conventions; Figure 101 Network Temporarily Disconnected; Figure 102 Error Message - ZyXEL Communications P-660W-Tx User Manual

Figure 101 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Back to go back to
the Firmware screen.

Figure 102 Error Message

17.8 FTP Command Line Examples

This section shows some examples of uploading to or downloading files from the ZyXEL
Device using FTP commands. First, understand the filename conventions.

17.8.1 Filename Conventions

The configuration file (also known as the romfile or ROM) contains the factory default
settings in the screens such as password, ZyXEL Device setup, IP Setup, and so on. Once you
have customized the ZyXEL Device's settings, they can be saved back to your computer under
a filename of your choosing.
ZyNOS (ZyXEL Network Operating System, sometimes referred to as the "ras" file) is the
system firmware and has a "bin" filename extension.

Table 70 Filename Conventions

FILE TYPE
Configuration File
Firmware
Example FTP Commands
ftp> put firmware.bin ras
P-660W-Tx v2 User's Guide
INTERNAL EXTERNAL
NAME NAME
config *.rom
ras *.bin
Chapter 17 Maintenance
DESCRIPTION
This is the configuration (config) filename on the
ZyXEL Device. Uploading the config file replaces the
specified configuration file system, including your
ZyXEL Device configurations, system-related data
(including the default password), the error log and the
trace log.
This is the generic name for the ZyNOS firmware on
the ZyXEL Device.
181