List Of Components; New Features; List Of All Features - Christie CP2000-SB Setup Manual
Hide thumbs
Also See for CP2000-SB:
- User manual (203 pages) ,
- Instruction sheet (9 pages) ,
- Technical bulletin (8 pages)
Table of Contents
Advertisement
Section 1: Introduction
1.1.1 List of Components
Ensure that you have received the following components:
• Pedestal on casters, with 4 retractable feet installed
• Projector Head with lens mount (installed) and auxiliary lens mount (optional)
• Touch Panel Controller with mounting hardware
• Lamp
• Lens (plus anamorphic or wide converter lens, optional)
• Standard-security keys, high-security keys and assembly hardware
• User Manual
1.1.2 New Features
• Motorized Lens Mount automates the process of setting the Focus, Horizontal (X) and Vertical (Y) Offset,
and Zoom. NOTE: TPC version 2.9 higher is required.
1.1.3 List of All Features
• DLP Cinema
• Versatile electronic and optical scaling to fill wide screens
• CineBlack
• CineCanvas
• Two SMPTE 292M cinema inputs, used individually or simultaneously for high-speed dual-link process-
ing, and each supporting CineLink
• Dual DVI (Digital Visual Interface) connectors for alternative "non-cinema" content, used individually or
simultaneously for high-speed dual-link processing
• Screen brightness: Up to 14 fL on 90-ft. screen
• Achievable contrast ratio 450:1 ANSI, 2100:1 full field on/off in center.
• LampLOC
• LiteLOC
for maintaining brightness over time
• Simple single-button "Start Feature" function via Touch Panel Controller
• Auto-detection of a variety of SMPTE 292M input formats
2:2 pull-down time code)
• Internal douser (shutter) for quick picture muting and cool stand-by mode
• Bit depth of 45 bits, 35.2 trillion colors
• New ruggedized lens mount that accepts the new High Brightness (HB) lenses as well as previously avail-
able High Contrast (HC) lenses
• Choice of High Brightness and High Contrast zoom lenses
• Optional Motorized Auxiliary Lens Mount (for 1.25x anamorphic or 1.26x wide converter lenses)
• Communication ports for remote control of the projector via PC or other controller
• High-security tamper-resistant lid lock, with all access electronically monitored
1-2
3-chip electronics with 2048 x 1080 native resolution
and CinePalette
for deep film-like blacks and superior colorimetry
for flexible telecine-grade resizing, subtitling, and other text and graphic overlays
®
motorized lamp alignment (automatic or custom bulb positioning)
2 local link encryption
(incoming interlaced formats require proper 3:2 or
(from 1.25:1 up to 8.5:1)
CP2000-SB Setup Guide
020-100249-02 Rev. 1 (05-2009)
Advertisement
Table of Contents
