Power And Lamp Requirements; Software Requirements - Christie CP2000-SB Setup Manual

• DC2K 3D Triple Flash functionality, capable of projecting full resolution 3D images under a 6:2 frame rate
multiplication. NOTE: TI DLP version 13 series or higher is required.
• HDCP decryption on both DVI inputs allows display of copy protected alternate content.

1.1.4 Power and Lamp Requirements

POWER LEVELS: The CP2000-SB offers higher power for the largest venues. The CP2000-SB uses a 7 kW
pedestal (P/N 101-101101-01). This is the only pedestal available for this model.
NOTES: 1) The CP000-SB pedestal does not include an internal convenience outlet. 2) All 7 kW ballasts
used in CP projectors are limited by software to 6.6 kW use.
LAMPS: The CP2000-SB accommodates different lamps. Refer to the CP2000-SB User Manual (020-
100162-xx) for a complete list of supported lamps.
OTHER: Optional Christie components include other primary zoom lenses, a motorized auxiliary lens mount
and lens, DCP Librarian setup software, and high-security locks. Refer to the CP2000-SB User Manual (020-
100162-xx) for more information.

1.1.5 Software Requirements

DLP version 14 series or higher
TPC version 2.9 or higher
CP2000-SB Setup Guide
020-100249-02 Rev. 1 (05-2009)
Section 1: Introduction
1-3