Setting the Compression Level
You can specify the appropriate compression
level.
On the [Scan Menu] screen, select the
1
scan mode you want and then press
If you select [USB Memory], go to step 3.
Press the
to select [Scan Setting]
2
and then press
OK
Press the
to select the [Compression
3
Rate] and then press
If you use the Internet fax function, go to step 5.
Press the
to select the color type
4
(Color, Mono etc.) and then press
Press the
to select the compression
5
level from [High], [Medium] or [Low]
and then press
OK
Memo
If you select [Mono (Binary)], you can select a
compression level from [High], [Medium] or [Raw].
Setting the Grayscale
When Grayscale is enabled, data scanned by
is not black-and-white (binary) but
M
ONO
grayscale (255 tones).
Note
This function is only for scanning. Internet FAX and Scan
to Fax Server cannot be used.
On the [Scan Menu] screen, select the
1
scan mode you want and then press
If you select [USB Memory], go to step 3.
Press the
to select [Scan Setting]
2
and then press
OK
Press the
to select the [Grayscale]
3
and then press
OK
Press the
to select [ON] and then
4
press
.
OK
Advanced Operations for Scanning, Internet Faxing and Scanning to Fax Server
OK
.
.
OK
.
OK
.
OK
.
.
.
.
- 39 -
3