Changing Paper Size; Changing The Paper Size For Trays 1 And 2 - Xerox WorkCentre 5019 User Manual

Changing paper size

This section describes how to change paper size in Trays 1 and 2.
Notes
• Do not load mixed paper sizes into a tray.
• When you change the size and orientation of paper in a tray, change the paper size
setting to match the paper size. For more information on how to change the paper size
and orientation settings, refer to

Changing the paper size for Trays 1 and 2

1. Pull out the tray until it stops.
Notes
• While the machine is copying or printing, do not pull out the tray that the job uses.
• To prevent paper jams or loading errors, do not load different sizes or types of paper on
top of any remaining paper in a tray.
2. Remove any paper loaded in the tray.
3. For Tray 1, push down the metal plate to the bottom of the tray.
WorkCentre 5019/5021
User Guide
Setting the paper size
Loading paper
on page 4-13.
4-11