Phone Ring Tone - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[111] PHONE RING TONE

Allows the system administrator or technician to select the ring tone heard at each phone.
Eight ring tones are available. A short tone burst of the selection will be heard when the
dial keypad is pressed.
DEFAULT DATA
FREQUENCY: 5
ACTION
1) Press Transfer button and enter 111.
Display shows:
2) Dial phone number. (e.g., 205)
OR
Press Volume button to select station and press Right
Soft button to move cursor.
OR
Select all stations.
3) Dial 1~8 to select ring tone.
OR
Press Volume button to select ring tone and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 114
MMC 318
2-24
PHONE VOLUME
DISTINCTIVE RINGING
DISPLAY
[201] RING TONE
SELECTION 5
[205] RING TONE
SELECTION 5
[ALL] RING TONE
SELECTION ?
[205] RING TONE
SELECTION 5
© SAMSUNG Electronics Co., Ltd.