Samsung OfficeServ 7000 Series Programming Manual page 400

CHAPTER 2. MMC Programming
MGI PARAMETERS
- IP ADDRESS, GATEWAY, and SUB MASK-any changes to these parameters
- When changing any IP address/value, three digits must be entered for each
CONDITIONS
This MMC cannot be accessed unless there is an MGI card installed in the system.
ACTION
1) Press Transfer button and enter 831.
Display shows the first MGI card.
2) Enter MGI number.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter MGI parameter number.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter MGI parameter.
OR
Press Right Soft button to move cursor.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-362
will not be applied until the MGI card is reset.
(octet) field. For example, 192.168.1.10 should be entered as 192.168. 001. 010.
DISPLAY
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
165. 10. 1.100
© SAMSUNG Electronics Co., Ltd.