Rcm2 Dsp Mode Select - Samsung OfficeServ 7000 Series Programming Manual

[828] RCM2 DSP MODE SELECT

RCM2 D-Board is operated one mode of R2/CID, R2 only, CID only, B'd TYPE
This MMC can assign RCM2 DSP mode.
CONDITION
RCM2 board must be equiped in LCP.
MMC [827]
This MMC is only shown in OfficeServ 7200. OfficeServ 7200 only supports
RCM2 D-Board.
DEFAULT DATA
R2/CID
ACTION
1) Press Transfer button and enter 828.
Display shows:
2) Dial the cabinet number. (1-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial the LOC number. (1-3)
OR
Press Volume button to select and press Right Soft
button to move cursor.
4) Dial digit to select RCM2 mode. (0-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
DISPLAY
R2MFC/CID SELECT
C1-B1 :R2/CID
R2MFC/CID SELECT
C2-B1 :R2/CID
R2MFC/CID SELECT
C2-B1 :R2/CID
R2MFC/CID SELECT
C2-B1 :R2 ONLY
2-355