Assign Disa Trunk - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[410] ASSIGN DISA TRUNK

Allows the system to have Direct Inward System Access (DISA). Because there is a
possibility that unauthorized calls will be made via this feature, several safeguards have
been added. Users must be informed of these to prevent unnecessary service calls.
DISA can lock out when a predetermined number of invalid consecutive calls are attempted.
Callers will then receive error tone until the programmable timer has expired.
CONDITIONS

The * key may be used to initiate new dial tone while in a station to station call.

The # button may be used to terminate the DISA call and disconnect the central office
line. DISA lines must be assigned to the ring plan (s).
DEFAULT DATA
ALL TRUNKS: NORMAL
ACTION
1) Press Transfer button and enter 410.
Display shows:
2) Dial trunk number. (e.g., 704)
OR
Press Volume button to select trunk and press Right
Soft button.
OR
Select all trunks.
OR
3) Press Volume button to select a Ring Plan. (e.g., 3)
OR
Using the dial keypad, press 1 to select or 0 not to
select the Ring Plan. (e.g., 1 to select)
Press Right Soft button to return to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 500
2-126
SYSTEM-WIDE COUNTERS
DISPLAY
[701] 123456
DISA LINE:000000
[704] 123456
DISA LINE:000000
[ALL] 123456
DISA LINE:000000
[704] 123456
DISA LINE:001000
© SAMSUNG Electronics Co., Ltd.