Aa Plan Table - Samsung OfficeServ 7000 Series Programming Manual

[733] AA PLAN TABLE

Used to program each AA plan. A plan is a module that processes a call. There are twelve
plans available in each AA card. Each plan can route a caller to any group, extension or
another plan. Each port can answer calls with a different plan as defined in MMC 735.
AA messages can be as follows:
Message
MESSAGES 01-48
MESSAGES 49-64
This MMC includes options to select messages to play to a caller. These messages can be
as follows:
No
00~05 PLAN MSG1~6
06 ALTER MSG
© SAMSUNG Electronics Co., Ltd.
These can be created using the AAREC Soft button (programmed on
phones by using MMC 722 or 723). A total of two minutes of
message time is available.
These are pre-programmed as follows:
(The announcement may be different according to the AA MSG
ROM)
49 'Thank you for calling, please dial your party's extension
number'.
50 'Invalid number, please try again'.
51 'I'm sorry, there is no answer'.
52 'I'm sorry, that station is busy'.
53 'One moment please'.
54 'Transferring'.
55 'I'll transfer you'.
56 'Good-bye'.
57 'Thank you'.
58 'Please hold for the operator'.
59 'Please hold for assistance'.
60 'Thank you, good-bye'.
61 'I'm sorry, all stations are presently busy'.
62 'I'm sorry, all stations are still busy'.
63 'Please call back later'.
64 'I'm sorry, not a valid selection'.
Option
This is the message that will be heard by the caller when the AA port
answers a call if the telephone system is in a particular ring mode or
if another message has been selected by the AA administrator.
This is the message that will be heard by the caller when the AA port
answers a call if this message has been selected by the AA
administrator.
OfficeServ 7000 Series Call Server Programming Manual
Description
Description
2-283