Samsung OfficeServ 7000 Series Programming Manual page 452

CHAPTER 2. MMC Programming
No Code
08 MJA08
09 MJA09
10 MJA10
11 MJA11
12 MJA12
13 MJA13
14 MJA14
15 MJA15
16 MJA16
17 MJA17
18 MJA18
19 MJA19
20 MJA20
21 MJA21
22 MJA22
23 MJA23
24 MJA24
25 MJA25
25 MJA26
- MJA27
- MJA28
- MJA29
- MJA30
- MJA31
- MJB--
2-414
Alarm Name
FAN Out of Order A FAN does not work.
FAN Recovery A FAN which did not work starts to operate correctly
before system stops.
CPU Overload CPU Overload
CPU Overload CPU Overload Recovery
Rec
FLASH FORMAT FLASH FORMAT Error
Err
Invalid MMC Halt An Invalid MMC card has inserted in SYSTEM.
So system is halted.
DUAL PWR Error Dual Power Error alarm
DUAL PWR Dual Power recovery alarm
Recovry
D-PWR FAN Dual Power FAN Error alarm
Error
D-PWR FAN Dual Power FAN recovery alarm
Recov
PoE PWR Error PoE Power Error alarm
PoE PWR PoE Power recovery alarm
Recovry
PoE FAN Error PoE Power FAN Error alarm
PoE FAN PoE Power FAN recovery alarm
Recovry
PoE Battry Error PoE Power Battery Error alarm
PoE Battry Recov PoE Power Battery recovery alarm
MAIN PWR Error PoE Power Battery Error alarm
MAIN PWR PoE Power Battery recovery alarm
Recovry
MEDIA NOT Media Card Out without dismounted
UMOUNT
SYS Overheat System Overheat alarm
SYS High Temp System High Temperature alarm
SYS Normal System Normal Temperature alarm
Temp
PCM SW Init Fail PCM Switch initial fail alarm
PCM SW Init Rec PCM Switch initial recovered alarm
LCP/TASK Error LCP or TASK Fault
(Continued)
Definition
© SAMSUNG Electronics Co., Ltd.