Samsung OfficeServ 7000 Series Programming Manual page 100

CHAPTER 2. MMC Programming
No Option
39 SGR ALL OUT
40 CHAIN FWD
41 TRK MONITER
42 VOIP MFRALOC
43 NTWK
AUTOTMR
44 USE EURO
45 NO STAFF
COD
46 PERI UCD SIO
47 AUTO
CLEANED
48 REDIAL REVW
50 ISDN KEYFAC
52 CHK SPV TRK
53 PRE FWD
BUSY
54 ORG DIAL LOG
55 TIE TRSF RCL
2-62
Default
OFF When ON, the last remaining station group member can leave
a group.
ON If ON, an incoming call forwarded from a station to another
station may then be forwarded to the mailbox of the second
station, if the latter is set for 'forward to voice mail'. If this
option is OFF, the call may only be forwarded to the mailbox of
the first station.
OFF If ON, the system will monitor the trunk supervision signaling.
That is, if a disconnection signal is received from the
exchange, the call will be cleared and the extension will go
back on hook.
OFF If ON, this allocates a DTMF receiver for a VOIP tandem caller
breaking out on another trunk group.
OFF If OFF, the call timer in the phone display will not function if the
call is from a network connection (Q-SIG).
OFF If ON, the unit of currency shown in call displays and on
SMDR reports will be Euros (€). (This will also display on Hotel
Application invoices.)
OFF When ON, the steps verifying the staff code will be omitted in
Hotel operation.
OFF When ON, the PERI UCD data will be sent to the SMDR IO port.
OFF Normally, when a room is checked-out, the room status is
changed to NEED CLEAN. When the option is set to ON, the
room status will be changed to AVAILABLE instead. (Hotel
Application.)
OFF When ON, the CALL LOG review will appear when the Redial
or LNR button is pressed.
OFF If ON, allows Keypad Facility messages to be sent to the
exchange to invoke network features.
OFF When ON, if trunks don't have the supervision feature they
cannot make outgoing transfers or unsupervised conferences.
OFF When ON, and a call arrives at a busy station that is not set for
forward busy, if a preset no answer destination is available the
call is re-routed to that destination.
OFF When ON, all dialed digits will be saved in the outgoing call log
for Large LCD phones. When OFF, invalid dialing such as
dialing of a non-existent station number will not be saved in
the outgoing call log for Large LCD phones.
ON When ON, and a trunk call transferred to the tie line is not
answered within the transfer recall time, the call is recalled to
the original transferring station. (This option may not be
available in certain OfficeServ models.)
Description
© SAMSUNG Electronics Co., Ltd.
(Continued)