Samsung OfficeServ 7000 Series Programming Manual page 298

CHAPTER 2. MMC Programming
DEFAULT DATA
SEE DEFAULT DATA IN MMC 722
ACTION
1) Press Transfer button and enter 723.
Display shows:
2) Enter type of set via dial keypad. (e.g.,1)
OR
Press Volume button to make selection and press
Right Soft button.
3) Enter key number. (e.g., 03)
OR
Press Volume button to make selection and press
Right Soft button.
4) Using table above, press dial keypad to select number.
OR
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to enter
extender, if required.
OR
Press Left Soft button to return to step 3.
5) Enter extender if required. (e.g., 03)
OR
Press Volume button to make selection and press
Right Soft button to return to step 2.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 107
MMC 720
MMC 721
2-260
KEY EXTENDER
COPY KEY PROGRAMMING
SAVE STATION KEY PROGRAMMING
DISPLAY
TYPE:24 BTN SETS
01:CALL1
TYPE:12 BTN SETS
01:CALL1
TYPE:12 BTN SETS
03:NONE
TYPE:12 BTN SETS
03:NONEGPIK
TYPE:12 BTN SETS
03:GPIK (GPIK03
© SAMSUNG Electronics Co., Ltd.