Assign Trunk Group - Samsung OfficeServ 7000 Series Programming Manual

[603] ASSIGN TRUNK GROUP

Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is
useful in the programming of LCR when more than one trunk is to be in several dialing
plans. There are two different modes of operation: (1) sequential and (2) distribute.
There are 30 programmable trunk groups with up to 99 members per group. But in case of
OfficeServ 7100, it is possible to assign up to 60 members per group and there are 11
programmable trunk groups.
Trunk group
One trunk can appear in more than one trunk group. If necessary, delete the trunk
member from other groups to prevent accidental access.
No
0 TYPE
1 MODE
2 MEMBER
DEFAULT DATA
Item
TYPE / MEMBER
MODE
© SAMSUNG Electronics Co., Ltd.
Item
Specify the type of trunk group. This option has 7 kinds of values.
MIXED TRUNK: default. Associated in various kind of trunk channel
NORMAL TRK
ISDN TRK
SIP TRK
H.323 TRUNK
SPNET TRUNK
QSIG PRI
Select the way searching idle channel of trunk.
Trunk channel member
You can input trunk channel corresponding trunk type. But in case of
MIXED TRUNK type, It's possible to input different kind of trunk
channel
9
800
801
803
804
805
others
SEQUENTIAL
OfficeServ 7000 Series Call Server Programming Manual
Description
Description
MIXED TRUNK/LOOP, BRI, PRI trunk
MIXED TRUNK/E&M, B/W
ISDN TRUNK/ISDN trunk
SPNET TRUNK/VoIP Networking trunk
H.323 TRUNK/H.323 trunk
(H323 is not used in some OfficeServ
system.)
SIP TRUNK/SIP trunk
MIXED TRUNK/NONE
2-199