Samsung OfficeServ 7000 Series Programming Manual page 207
Call server
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (473 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
Timer Name
DISA NO ACTION
DISPLAY DELAY TM
DOOR LOCK RELES.
DOOR RING DETECT
DOOR RING OFF TM
E-HOLD RECALL TM
FIRST DIGIT TIME
HOK FLASH MAX TM
HOK FLASH MIN TM
HOOK OFF TIME
HOOK ON TIME
INQUIRY RELEASE
INTER DIGIT TIME
ISDN INT DGT TM
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Default
Range Unit
10
0-250 SEC
3
1-250 SEC
500
100-2500
MSEC
50
10-250
MSEC
30
1-250 SEC
45
0-250 SEC
10
1-250 SEC
120
20-2500
MSEC
70
20-2500
MSEC
100
20-2500
MSEC
200
20-2500
MSEC
30
1-250 SEC
10
1-250 SEC
7
1-15 SEC
Description
This timer controls how long a DISA line will
wait for further action from the caller.
This timer controls how long a display is
shown in the LCD and how long error tone is
heard.
This timer controls how long the door lock
relay will be activated.
This timer controls the time before a call is
answered by the door phone.
This timer controls the duration of ringing at
the door ring destination before automatically
cancelling.
This timer controls how long a call is held
exclusively at a station before recalling.
This timer controls how long the system will
wait for dialing to begin before dropping the
dial tone and returning the you to error tone.
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental
hookswitch bounce LONGEST duration.
This timer monitors the duration of a hook
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook
switch bounce SHORTEST duration.
This timer controls the time before dial tone is
sent to a single line station.
This timer sets the minimum amount of time that
the system will recognize as an SLT hang up.
This timer monitors the duration of the
interaction of the Soft button to determine
when to return the LCD back to a normal
status. This timer affects only display phones.
This timer controls the grace period between
dialing valid digits before dropping the call and
returning you back to error tone.
This timer controls the grace period between
dialing valid digits and the end of the dialing
string on an ISDN call.
(Continued)
2-169
Advertisement
Table of Contents
