Samsung OfficeServ 7000 Series Programming Manual page 238

CHAPTER 2. MMC Programming
ACTION
1) Press Transfer button and enter 603.
Display shows:
2) Enter valid trunk group. (e.g., 9)
OR
Press Volume button to make selection and press
Right Soft button to advance cursor.
3) Press Right Soft button to change mode.
OR
Press Volume button to change mode to member.
4) Press Right Soft button to change mode.
OR
Press Volume button to change mode to member.
5) Press Right Soft button to move cursor to number of
member and enter valid member number
(e.g., 05) via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
6) Enter valid trunk number. (e.g., 729)
OR
Press Volume button to make selection and press
Right Soft button to return to step 2.
7) Repeat steps 1-5 to remove trunk from group 9 if
necessary.
8) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-200
DISPLAY
[9] TRK GROUP
TYPE:MIXED TRUNK
[9] TRK GROUP
TYPE:MIXED TRUNK
[9] TRK GROUP
MODE: SEQUENTIAL
[9] TRK GROUP
MEMBER 01:NONE
[9] TRK GROUP
MEMBER 05:NONE
[9] TRK GROUP
MEMBER 01:729
© SAMSUNG Electronics Co., Ltd.