Station Speed Dial - Samsung OfficeServ 7000 Series Programming Manual

[105] STATION SPEED DIAL

Allows the system administrator or technician to assign phone numbers to a station's
personal speed dial locations.
CONDITIONS
Each station may have up to 50 locations (or bins) assigned to it in MMC 606 (Assign
Speed Block). The speed dial bins are numbered 00~49. Each assigned phone number
consists of a trunk or trunk group access code followed by a separator and up to 24 digits to
be dialed. These dial digits may consist of 0~9, * and #. If the system recognizes a valid
trunk or trunk group access number, it will automatically insert the separator.
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code 'F'
C Used to insert a pause code 'P'
D Used to insert a pulse/tone conversion code 'C'
E Used to mask/unmask following digits (shows as '['or ']')
F Used to enter name for speed dial bin (see MMC 106)
ACTION
1) Press Transfer button and enter 105.
Display shows:
2) Dial station number. (e.g., 205)
OR
Press Volume button to select station and press Right
Soft button to move cursor.
If selected station has no speed dial bins, the display
will be as shown and a new station may be selected.
3) Dial location number. (e.g., 05)
OR
Press Volume button to select location and press Right
Soft button to move cursor.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
DISPLAY
[201] SPEED DIAL
00:
[205] SPEED DIAL
00:
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05:_
2-11