Assign Networking Options - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[825] ASSIGN NETWORKING OPTIONS

Assigns the options used for networking.
No
0 ADD NUMBER TO NAME
1 USE REMOTE VM
2 REMOTE VM NUMBER
3 REMOTE CID NUMB
4 USE REMOTE ATTN
5 REMOTE ATTN NUMB
6 SPNET DIGIT SEND
DEFAULT DATA
ADD NUMB TO NAME: YES
USE REMOTE VM: NO
REMOTE VM NUMBER: NONE
REMOTE CID NUMB: YES
USE REMOTE ATTN: NO
REMOTE ATTN NUMB: NONE
SPNET DIGIT SEND: MGI SIGNALING
ACTION
1) Press Transfer button and enter 825.
Display shows:
2) Dial the option number.
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial 1 for YES or 0 for NO.
OR
Press Volume button to select YES/NO and press
Right Soft button to mover cursor.
2-350
Option
Assign to include the extension number in the name field of
Q-SIG standard message.
Assign to use SVMi on remote system.
Assign to access number of remote SVMi when the Remote
VM is used.
Assign to use delete node number when CID number send to
SVMi.
Use Attendant on remote system. (RING 1-6, Y/N)
Access number of remote Attendant when the remote
Attendant is used. (RING 1-6)
Specify by which method dialed digits are sent across the
network.
Description
DISPLAY
ADD NUMB TO NAME
YES
USE REMOTE VM
NO
USE REMOTE VM
YES
© SAMSUNG Electronics Co., Ltd.