[718] MY AREA CODE
This MMC defines the home area code and country code. This information is used for
caller ID and ISDN calls in defining the area code on incoming calls. This MMC removes
the local area code to allow callback without digit modifications in LCR.
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 718.
Display shows:
2) Enter 0 for COUNTRY or 1 for AREA.
OR
Press Volume buttons to make selection and press
Right Soft button to move cursor.
3) Enter area code (maximum 4 digits) via dial keypad
(e.g., 2) and press Right Soft button to move
cursor back to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
TRUNK PROGRAMMING
Refer to 'RELATED ITEMS' in MMC 411, ASSIGN E1 SIGNAL TYPE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
DISPLAY
MY AREA CODE
AREA :
MY AREA CODE
AREA :
MY AREA CODE
AREA :2
2-249