Samsung OfficeServ 7000 Series Programming Manual page 410

CHAPTER 2. MMC Programming
No Parameter
18 TOS/DifServ
19 802.1 p/q
20 802.1 P
21 802.1 VLAN
22 G711 FRAME
23 G729 FRAME
24 G729s FRAME
25 G723 FRAME
2-372
Description
An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the MGI card. This value can
be left at the default value (00000) if your network
infrastructure does not support this method of
bandwidth management.
Each created channel may be given its own Ethernet
header provided that the Comcerto MAC address is
unique. When sending a payload Ethernet frame, each
channel uses its own Ethernet header (if it has one).
This option is enable or disable for 802.1p/q.
(including 802.1 VLAN and 802.1 Priority)
NOTE: These options apply to RTP/RTCP.
Set the 802.1 priority. The range is 0~7.
Set the VLAN tag. The range is 0~ 4095.
specify the transmission interval time of the VoIP packet
for G.711 codec
specify the transmission interval time of the VoIP packet
for G.719 codec
specify the transmission interval time of the VoIP packet
for G.729a codec
specify the transmission interval time of the VoIP packet
for G.711 codec
(Continued)
Default
All bits 0
Disable
0
0
20 ms
20 ms
20 ms
30 ms
© SAMSUNG Electronics Co., Ltd.