Enable Technician Program - Samsung OfficeServ 7000 Series Programming Manual

[800] ENABLE TECHNICIAN PROGRAM

Used to open and close technician-level programming. If programming is not opened and
an attempt is made to access a system MMC, an error message will be displayed.
CONDITIONS
A 4-digit passcode is required to access this MMC. Each character can be digits 0-9.
When opened, this MMC enables access to all MMCs.
DEFAULT DATA
DISABLE
ACTION
1) Press Transfer button and enter 800.
Display shows:
2) Enter passcode.
Correct code shows:
Incorrect code shows:
3) Enter 1 to enable or 0 to disable.
OR
Press Volume button to select and press Right Soft
button to move tenant number and enter tenant
number (1-2).
4) Press Speaker button to advance to MMC entry level.
5) Enter the MMC required to begin programming.
6) To log out and return to MMC 800, press Volume
button to select DISABLE.
OR
Press Speaker button then Transfer to return to
normal display.
Programming option will time out.
RELATED ITEMS
MMC 801
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
CHANGE TECHNICIAN PASSCODE
DISPLAY
ENABLE TECH.PROG
PASSCODE:
ENABLE TECH.PROG
PASSCODE:∗∗∗∗
ENABLE TECH.PROG
DISABLE TENANT:1
ENABLE TECH. PROG
PASSCODE ERROR
ENABLE TECH.PROG
ENABLE TENANT:1
801:TEC.PASSCODE
SELECT PROG.ID
2-317