Ip Phone Information - Samsung OfficeServ 7000 Series Programming Manual

[840] IP PHONE INFORMATION

This MMC provides a means to register IP phones with the OfficeServ 7000 Series system.
During registration, the IP and MAC addresses are also registered. The User ID and
Password must match the table entry in this MMC for the IP phone to be registered.
The system default phone numbers are 3201~3299 and default User IDs match the default
station numbers. The system default password is 1234. IP phones must be individually
programmed with a User ID and Password in order to register with the system.
No Option
00 USER ID
01 USER PSWD
02 IP ADDR
03 MAC ADDR
04 SIG PORT
05 VOICE PORT
07 DSP TYPE
08 PHONE TYPE
09 REGIST CLR
10 FRAME
COUNT
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Description
This is the ID the IP phone must match to register
with the OfficeServ 7000 Series system.
(alphanumeric)
To register IP phone in PnP mode (plug and play),
the MAC address of IP phone has to be entered in
USER ID option. And then IP phone has to do
factory reset.
This is the password the IP phone must have to
register with the OfficeServ 7000 Series system.
(alphanumeric)
This is the IP address of the IP phone when
registered with the system. (Read only)
This is MAC address of the IP phone when
registered with the system. (Read only)
This is the IP UDP port of the IP phone when
registered with the system. (Read only) This
information will be needed when traversing NAT
routers, firewalls, etc.
This is the IP RTP port of the IP phone when
registered with the system. (Read only) This
information will be needed when traversing NAT
routers, firewalls, etc.
This selects which CODEC this phone's DSP will use.
G.729A (low bandwidth) or G.711 (high bandwidth).
This data uses IP phone to IP phone connection
only; others follow MGI CODEC type.
This is the type of IP phone used, SAMSUNG or SIP
(future). Use SAMSUNG.
This is used to clear the registration of a particular
IP phone. This is similar to unplugging and plugging
in the phone and is useful for maintenance.
This value determines the transmission interval time
of VoIP packets generated by the IP phone.
This data uses MMC 841 ITP DSP PARA DOWN =
PHONE DATA only. The range is 10~40 ms.
Default
First 99 IP phones
are 3201~3299,
others are EMPTY.
'1234'
0.0.0.0.
FFFFFFFFFFFF
6000
9000
G.729A
SAMSUNG
NO
20 ms
2-391