Call Cost - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[508] CALL COST

Set the Call Cost attributes generated by the system during a call. This information can be
displayed on the phone during a call or as an SMDR record.
No
0
1
CALL COST
Changing this value when there is a call in progress may result in an inaccurate
call cost. This MPD facility requires the Meter Pulse Detection version of the trunk
card.
DEFAULT DATA
UNIT COST PER MP: 0200 PENCE, CALL COST RATE: 100 PERCENT
ACTION
1) Press Transfer button and enter 508.
Display shows:
2) Dial 0 or 1.
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Enter new value. (e.g., 110)
System returns to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 110
2-184
Display
UNIT COST PER MP
CALL COST RATE
STATION ON/OFF (CALL COST OPTION)
Description
When the system is installed to receive metering pulses
on a C.O. outgoing call. It is used for generating total call
cost by multiplying it by the number of pulses. Allows a
maximum value of 9999. (Currency is PENCE or ECENTS
depending on USE EURO option setting in MMC 210.)
This generates additional call cost calculated by
multiplying this rate by the original call cost. Ranges from
100 to 255.
DISPLAY
UNIT COST PER MP
0200 PENCE 
CALL COST RATE
100 % 
CALL COST RATE
110 % 
© SAMSUNG Electronics Co., Ltd.