Samsung OfficeServ 7000 Series Programming Manual page 455

No Code
80 MJE05
81 MJE06
82 MJE07
83 MJE08
84 MJE09
85 MJE10
86 MJE11
87 MJE12
88 MJE13
89 MJE14
90 MJE15
- MJE16
MJE17
-
- MJE18
- MJE19
MJE20
-
- MJE21
- MJE22
MJE23
-
- MNF--
91 MNF01
92 MNF02
94 MNF04
© SAMSUNG Electronics Co., Ltd.
Alarm Name
MGI NTWK Rec The MGI card has restarted because the system detects
the card does respond via network link.
External ping test.
Alarm Data = Cabinet, Slot (Cx-Syy)
MGI DSP Error The MGI card DSP has blocked because the system
detects the card DSP does not run correctly.
Alarm Data = Cabinet, Slot (Cx-Syy-Pzz)
MGI DSP Run The MGI card DSP has restarted because the system
detects the card DSP runs correctly.
Alarm Data = Cabinet, Slot (Cx-Syy-Pzz)
WBS Disconnect Indicates the WBS is disconnected.
Alarm Data = CWBS:xx or BWBS:xx
WBS connect Indicates the WBS is connected.
Alarm Data = CWBS:xx or BWBS:xx
SVMi Restart SVMi Restart
SVMi Halt Whether to halt the SVMi card
SVMi Down Whether to shut down the SVMi card
MGI Self Restart MGI Self Restart
MPS Restart MPS module Restart
MPS Stop MPS module Stop
OAS NTWK Error OAS Network Error
OAS NTWK OAS Network Recovery
Recovery
OAS IP CONFLICT OAS IP CONFLICT
OAS IP Recovery OAS IP Recovery
OAS Start OAS CARD START
OAS Stop OAS CARD STOP
OAS Link Down OAS CARD LINK DOWN
OAS Link Recover OAS CARD LINK RECOVERY
Minor Error Minor Fault with Alarm Buffer saving
Card Out A circuit card mounted in a universal slot has been
removed from service or is not recognized by the system.
Alarm Data = Cabinet, Slot (Cx-Syy)
Card In A circuit card mounted in a universal slot has been
returned to service.
Alarm Data = Cabinet, Slot (Cx-Syy)
Trunk Fault Out of service trunk detected via loop detect. Internal
CODEC test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
OfficeServ 7000 Series Call Server Programming Manual
Definition
(Continued)
2-417