Assign Vmmoh - Samsung OfficeServ 7000 Series Programming Manual

Call server
Hide thumbs Also See for OfficeServ 7000 Series:
Table of Contents

Advertisement

CHAPTER 2. MMC Programming

[756] ASSIGN VMMOH

This MMC is only used for the Samsung Built-In Voice Mail card or embeded VM.
It is used to assign each port a Music-On-Hold source for the system from a sound file
located on the Voice Mail card hard disk drive. The 100 available sound files are defined as
numbers 5000 to 5099.
To use the default music, select the number; otherwise, make sure you record the sound file
first. Then, assign the sound file to a Voice Mail port.
For example, if you record sound file 5025 you would associate 25 with a specific Voice
Mail port, e.g., 225. This will dedicate the port for use only as MOH and remove it from
group 529 or 549. Now 225 will show up as a valid music source in MMCs 308, 309 and
408.
Each Music-On-Hold source assigned here requires one Voice Mail port.
When the first Built-In Voice Mail port is used for VMMOH
If the first Built-In Voice Mail port is used for VMMOH, it must be disabled before
boot up since Built-In Voice Mail Card and the system use port 1 during boot up to
exchange critical information. For this reason we suggest you use the last port as
VMMOH ports.
DEFAULT DATA
NOT USED
ACTION
1) Press Transfer button and enter 756.
Display shows:
2) Dial VM number. (e.g., 215)
OR
Press Volume button to make a selection and press
Right Soft button to move cursor.
3) Enter VM message number. (e.g., 25)
OR
Press Volume button to make a selection and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
2-304
DISPLAY
SET VMMOH
209: NOT USED
SET VMMOH
215: NOT USED
SET VMMOH
215: 25
© SAMSUNG Electronics Co., Ltd.

Advertisement

Table of Contents
loading

Table of Contents