Samsung OfficeServ 7000 Series Programming Manual page 407

No Parameter
19 ALLOW GW CHECK
20 CLIR WITH NUMBER
21 USE OVERLAP DIAL
DEFAULT DATA
SEE DESCRIPTION
ACTION
1) Press Transfer button and enter 834.
Display shows the first option.
2) Enter H.323 option number (00-20) via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter H.323 option data via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Description
When using a gatekeeper, this permits the H.323
gateway to check for gatekeeper presence.
When this option is enabled, the CLIP number is
sent to the network even if the CLIP restriction flag
is set.
Enables use of overlap dialing.
(Continued)
Default
DISABLE
DISABLE
ENBLOC
DISPLAY
GATEWAY CALL ID
1234
H.323 FAST SETUP
DISABLE
H.323 FAST SETUP
ENABLE
2-369