Samsung OfficeServ 7000 Series Programming Manual page 208

CHAPTER 2. MMC Programming
Timer Name
KMMC LOCK OUT TM
LCR ADVANCE TIME
LCR INTER DIGIT
LONG KEY DETECT
LONG KEY REPEAT
MCL DELAY TIME
MS LED ON TIME
OFF HOOK RING INT
OHVA ANSWER TIME
PAGE TIME OUT
PAGE TONE TIME
PARK RECALL TIME
AP-MMC LOCK TIME
PERI UCD REPORT
POWER DOWN TIME
RECALL
DISCONNECT
2-170
Default Range Unit
30 10-50 SEC
5 1-250 SEC
5 1-250 SEC
600 0-2500
MSEC
300 0-2500
MSEC
4 0-9 SEC
5 1-10 SEC
15 1-250 SEC
10 1-250 SEC
20 1-250 SEC
500 100-2500
MSEC
45 0-250 SEC
5 1-60 MIN
5 3-99 SEC
2000 500-9900
MSEC
2 1-250 MIN
Description
This timer controls the grace period between
programming actions while in a programming
session. The timer automatically returns the
system to secure programming status.
This timer controls the time before selecting
the next allowable route when a station is
allowed to route advance.
This timer controls the grace period between
dialing valid digits before accessing a trunk.
This timer controls the time a key must be held
down before the key press is repeated.
This timer controls the time between repeated
digits on a long key press.
This timer controls the time when the system
should start transmitting Authorisation Code
after sending MCL access code (Cable&
Wireless 131 access). Available in UK only.
This timer controls the duration a Manual
Signaling key will remain on after use.
This timer controls the time between ring
bursts to a user who has a camped-on call.
This timer controls the time allowed to answer
an OHVA call before automatic rejection.
This timer controls the duration of a page
announcement.
This timer controls the duration of tone burst
heard over the page prior to the page
announcement.
This timer controls how long a call is parked
before recalling to the call park originator.
This timer monitors the PCMMC/WebMMC/
Installer activity, drops the link if no action is
created by PCMMC and returns the system
back to secure program status.
This timer determines the interval between
periodic UCD reports provided to an SIO port.
This timer monitors the power to the ROM
pack to begin shutdown status.
This is the time an attendant recall will ring
before being disconnected.
© SAMSUNG Electronics Co., Ltd.
(Continued)