Samsung OfficeServ 7000 Series Programming Manual page 419

SIP Carrier Configuration
No Parameter
00 SIP CARRIER
01 SIP SERVER
02 REGISTERED
03 REGIST
ADDR
04 REGIST PORT
05 OUT PROXY
06 ALTER
PROXY
07 PROXY PORT
08 PROXY NAME
09 DNS
SERVER1
10 DNS
SERVER2
11 USER NAME
12 AUTH USER
13 AUTH PSWD
14 REG PER
USER
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
Description
Alphanumeric Name of SIP Carrier
This indicates the ISP carrire name. User can set this
value, but the value doesn't affect to work of system.
Sets ENABLE or DISABLE to interact with external SIP
Server.
Displays the OfficeServ's registration status with the
external SIP server/ SIP carrier.
Designate the Domain Name or the IP Address of the SIP
Registrar. If the domain name value is entered here, the
DNS query is executed, and through this, the IP address
of the Registrar server is acquired.
Sets the port to use on the Registrar Server.
Designates the Domain Name or the IP Address of the
SIP Server. If the domain name value is entered here, the
DNS query is executed, and through this, the IP address
of the SIP Server is acquired.
Designates the Alternate Proxy IP Address which is used
if the primary SIP server fails.
Sets the port to use on the SIP Server.
Domain name which is set for the user authentication
when using the SIP server
Designates the IP address of any external name server
(DNS server). The DNS server resolves the SIP server
name to an IP address (This option may not be available
in certain OfficeServ models.)
Designate the alternative name server which is used
when the name server designated in the DNS server1
fails. (This option may not be available in certain
OfficeServ models.)
Alphanumeric System username when registering as a
trunking gateway. When empty, system does not send
REGISTER message to interacting Outbound SIP Server.
This is the username which is used if the authentication
is required from the SIP server. This is the item which is
used for registering the representative number.
This is the password which is used if the authentication is
required from the SIP server. This is the item which is
used for registering the representative number.
When interacting with the SIP Server, if this is enabled,
registration is made per user bases. Otherwise, system
will perform representative registration.
Default
-
DISABLE
NO
NONE
5060
NONE
0.0.0.0
5060
NONE
0.0.0.0
0.0.0.0
4100
NONE
NONE
DISABLE
2-381