Crm Dsp Mode Select - Samsung OfficeServ 7000 Series Programming Manual

[827] CRM DSP MODE SELECT

This MMC can assign CRM DSP mode. CRM D-Board can be operated one mode of
DTMFR, R2MFC, CID.
OfficeServ 7400 allows to configure the mode per DSP in CRM D-Board.
On the other hand, OfficeServ7200 allows to configure the mode per CRM D-Board.
If there is not CRM Board in LP40 or MCP, MP20, displays 'NO CRM'.
This option may not be available in certain OfficeServ models.
OfficeServ7400
OfficeServ7200
CONDITION
CRM board must be equiped in LP40 or MPC, MP20.
DEFAULT DATA
DSP1: DTMFR, DSP2: DTMFR
ACTION
1) Press Transfer button and enter 827.
Display shows:
2) Dial the cabinet number. (1-3)
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial the LOC number. (1-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
4) Dial the DSP number. (1-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
© SAMSUNG Electronics Co., Ltd.
Type
C:1-LOC:1-DSP:1
DTMFR  DTMFR
CRM DSP MODE SET
C1-B1: DTMFR
OfficeServ 7000 Series Call Server Programming Manual
Option
DISPLAY
C:1-LOC:1-DSP:1
DTMFR DTMFR
C:1-LOC:1-DSP:1
DTMFR DTMFR
C:1-LOC:1-DSP:1
DTMFR DTMFR
C:1-LOC:1-DSP:1
DTMFR DTMFR
2-353