Lcr Modify Digit Table - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[713] LCR MODIFY DIGIT TABLE

This program is sometimes referred to as Outgoing Dial Rules. It enables the system to add
or delete a digit string or singular digit if needed to complete a call. With these digits
inserted, a long distance call will be placed over a local line using the common carrier
network. The characters '*' and '#' can also be entered. There are 200 modify digit entries
available.
Option
NOF DEL DGT
I
A
DIGIT STRING KEY
Insert String + Digit String (delete) + Append String
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 713.
Display shows:
2) Enter index number. (e.g., 005)
OR
Press Volume buttons to make selection and press
Right Soft button to move cursor.
3) Enter number of digits to delete.
OR
Press Right Soft button to skip step and move cursor
to next step.
4) Enter digits to be inserted. (e.g., 10288)
OR
Press Right Soft button to skip step or to store
information and advance to next step.
5) Enter digits to be appended. (e.g., 45678)
OR
Press Right Soft button to skip step or to store
information and return to step 2.
2-240
Description
Number of digits to delete
Insert (before dialing string)
Append (after dialing string)
Max. No. of Digit Entries
15
14
14
DISPLAY
LCR MODIFY (001)
NOF DEL DGT:00
LCR MODIFY (005)
NOF DEL DGT:00
LCR MODIFY (005)
NOF DEL DGT:01
LCR MODIFY (005)
I:10288_
LCR MODIFY (005)
A:_
© SAMSUNG Electronics Co., Ltd.