4.2.8 Attaching a Ferrite Core
4.2.8 Attaching a Ferrite Core
A ferrite core must be attached when an RJ45 connector is connected to the SLC2/PRI23 card.
For the SLC2/PRI23 Cards
For the cable to connect to the ISDN Primary Rate Interface port, wrap the cable once around the ferrite core,
then close the case of the ferrite core. Attach the ferrite core 5 cm (2 in) away from the connector. The ferrite
core is included with the card.
5 cm (2 in)
122
Installation Manual
Document Version 2016-03