Panasonic KX-NS1000 Installation Manual page 42

2.2.1 Optional Equipment
Model No.
KX-NS0290
KX-NS0130
KX-NS0131
KX-NS0132
Note
•
For the maximum number of optional service cards that can be installed in the PBX, refer to
"2.3.3 System Capacity".
•
For details about the optional equipment for non-KX-NS1000 (e.g., KX-NS700) in a One-look network,
refer to the Installation Manual of the corresponding PBX.
42 Installation Manual
Model Name
PRI23 / 2-Port SLT Card (SLC2/
PRI23)
Stacking Master Card (STACK-M)
Stacking Card for KX-NCP Series
(STACK-S (NCP))
Stacking Card for KX-TDE Series
(STACK-S (TDE))
Description
A combination card including:
•
1 ISDN Primary Rate Interface port (23B
channels).
•
2 extension ports with Caller ID (FSK) for
SLTs.
NI (North American standard ISDN protocol)
compliant.
A stacking card to be installed in a KX-NS1000.
Up to 2 legacy gateways can be connected.
A stacking card to be installed in the MPR card
slot of a KX-NCP500 or KX-NCP1000 to be used
as a legacy gateway.
A stacking card to be installed in the MPR card
slot or the BUS-S card slot of the PBX to be used
as a legacy gateway.
For the following PBXs, this card is installed in
the MPR card slot:
KX-TDE100, KX-TDE200,
KX-TDA100, KX-TDA200,
KX-TDE600, KX-TDA600
For the following PBXs, this card is installed in
the BUS-S card slot:
KX-TDE620, KX-TDA620
Document Version 2016-03