Optional Equipment - Panasonic KX-NS1000 Installation Manual

2.2 Optional Equipment

2.2.1 Optional Equipment
Model No.
KX-NS0106
KX-NS0110
KX-NS0111
KX-NS0112
KX-NS0135
KX-NS0136
KX-NS0137
KX-NS0161
KX-NS0180
Document Version 2016-03
Model Name
FAX Interface Card (FAX)
VoIP DSP Card (S Type) (DSP S)
VoIP DSP Card (M Type) (DSP M)
VoIP DSP Card (L Type) (DSP L)
Storage Memory (S Type)
(Storage Memory S)
Storage Memory (M Type)
(Storage Memory M)
Storage Memory (L Type)
(Storage Memory L)
Doorphone Interface Card
(DOORPHONE)
2-Port Analog Trunk / 2-Port SLT
Card (SLC2/LCOT2)
Description
1-channel fax server. To be mounted on the
mother board.
A DSP card is a digital signal processor card with
DSP resources that can be used for VoIP calls,
conferences, the Unified Messaging feature, and
the DISA/OGM feature. The DSP cards are
compliant with ITU-T G.729A and G.711 codec
methods.
Depending on the amount of your DSP resource
needs, DSP S, DSP M, or DSP L cards can be
installed. The number of resources provided by
each type of DSP card is as follows:
•
DSP S card: 63
•
DSP M card: 127
•
DSP L card: 254
Up to 2 DSP cards can be installed on the mother
board.
To operate the PBX, at least one DSP S,
DSP M, or DSP L card must be installed in one
of the DSP card slots.
Storage Memory with maximum of 200 hours
Voice Mail recording time.
Storage Memory with maximum of 450 hours
Voice Mail recording time.
Storage Memory with maximum of 1000 hours
Voice Mail recording time.
1-port doorphone card for 1 doorphone, 1 door
opener, and 1 external sensor.
A combination card including:
•
2 analog CO line ports with Caller ID (FSK/
FSK with Call Waiting Caller ID [Visual Caller
ID]/DTMF). One port is a power failure
transfer (PFT) port.
•
2 extension ports with Caller ID (FSK) for
SLTs.
2.2.1 Optional Equipment
Installation Manual 41