Programming The Address Translation Table - Panasonic KX-NS1000 Installation Manual

Note
For more details about gateway settings, refer to "9.4 PBX Configuration—[1-1]
Configuration—Slot—System Property—GW Settings–Main" in the PC Programming Manual.
Document Version 2016-03

5.6.2 Programming the Address Translation Table

3. a. Click Setup ® PBX Configuration ®
Configuration ® Slot.
b.
Click System Property.
c.
Click the V-IPGW tab.
d.
Click DN2IP.
e.
When using the PBX code method:
In the Leading Number cell, type the remote PBX
code and starting digit of destination extension.
When using the extension number method:
In the Leading Number cell, type the remote PBX
code and starting digit of destination extension.
f.
In the Remaining Number of Digits cell, type a
number of digits to dial following the leading number.
g.
In GW No./GW Group Selection, select GW No.
h.
In the GW No. cell, select 1 (the gateway entry for
the destination gateway device at the remote PBX).
i.
Click OK.
Installation Manual 209