2.2 Installation of the Hybrid IP-PBX
2.2.8
Attaching a Ferrite Core
A ferrite core must be attached when:
•
an RJ45 connector is connected to IP-GW16 or IP-EXT16 cards, or
•
an Amphenol connector is connected to an extension card.
Attaching to an RJ45 Connector
For IP-GW16/IP-EXT16 Cards
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 5
cm (1-15/16 in) away from the connector. The ferrite core is included with the card.
Attaching to an Amphenol Connector
For Extension Cards
Pass the cable through the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3 cm
(1-3/16 in) away from the connector. The ferrite core is included with the card.
56
Installation Manual
5 cm
(1-15/16 in)
3 cm
(1-3/16 in)