Panasonic KX-NS1000 Installation Manual page 246

5.8.4 Setting Diffserv Parameters
KX-NT265 (Software version 2.00 or later only)
To start programming
Press PROGRAM while
"Searching" is displayed.
To set the DS field value
Press VOLUME to
select "DS (Enable)".
To end programming
HOLD
Press HOLD until the
Menu screen is displayed.
246 Installation Manual
Press VOLUME to Press SP-PHONE.
select "QoS".
Diffserv
0.0–7.7
Press SP-PHONE.
The IP-PT will reboot
registered to the PBX.
Press STORE.
Press VOLUME to
select "Diffserv".
Press SP-PHONE.
and can then be
Press SP-PHONE.
Document Version 2016-03