Panasonic KX-NS1000 Installation Manual page 67

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

IP CO Lines
Model No.
Activation Key Type
KX-NSM102
2 IP Trunk
KX-NSM104
4 IP Trunk
KX-NSM108
8 IP Trunk
KX-NSM116
16 IP Trunk
*1
You need to set the number of installed activation keys to be used for H.323 CO lines through system programming. By default, all
installed activation keys will be used for SIP CO lines.
*2
Refer to "2.3.3 System Capacity" for the maximum number of H.323 CO lines.
Installation in One-look Network System
Activation Keys
KX-NSM102
2 IP Trunk
KX-NSM104
4 IP Trunk
KX-NSM108
8 IP Trunk
KX-NSM116
16 IP Trunk
IP Telephone Capacity
Note
Up to 30 IP-PTs/IP softphones/KX-UT series SIP phones/P-SIP extensions/third party SIP phones can
be used without needing any of the following IP telephone capacity activation keys.
Activation keys for IP telephone capacity are not cumulative; the maximum overall capacity is
determined by the highest-numbered installed activation key.
In a One-look network, activation keys for IP telephone capacity and IP telephone capacity expansion
are available only for KX-NS1000 PBXs.
In a One-look network, activation keys for IP telephone capacity and IP telephone capacity expansion
are not cumulative; the maximum overall capacity depends on the system capacity. The total capacity
for IP-PTs, IP softphones, KX-UT series SIP phones, P-SIP extensions, and third party SIP phones is
1000.
Document Version 2016-03
3.1.1 Type and Maximum Number of Activation Keys
Description
Allows the use of 2 IP CO lines
(H.323/SIP).
Allows the use of 4 IP CO lines
(H.323/SIP).
Allows the use of 8 IP CO lines
(H.323/SIP).
Allows the use of 16 IP CO lines
(H.323/SIP).
Master Unit
Slave Unit
ü
Maximum IP CO Lines
Stand-alone
System
256 IP CO lines
(H.323/SIP)
ü
Installation Manual
One-look
Network
*1*2
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents