Stack-S (Tde) Card (Kx-Ns0132) - Panasonic KX-NS1000 Installation Manual

4.6.3 STACK-S (TDE) Card (KX-NS0132)

Function
A stacking card to be installed in the MPR card slot or the BUS-S card slot of the PBX to be used as a legacy
gateway.
For the following PBXs, this card is installed in the MPR card slot:
KX-TDE100, KX-TDE200,
KX-TDA100, KX-TDA200,
KX-TDE600, KX-TDA600
For the following PBXs, this card is installed in the BUS-S card slot:
KX-TDE620, KX-TDA620
LED
Stacking Connector
To STACK-M Card
Accessories and User-supplied Items
Accessories (included): Stacking cable ´ 1
User-supplied (not included): None
WARNING
A lithium battery is used in the STACK-S (TDE) card. There is a risk of explosion if the battery is
replaced with an incorrect type. Dispose of used batteries according to the manufacturer's
instructions.
CAUTION
When installing or removing this card, the power switch must be turned off.
Notice
When stacking other PBXs with the KX-NS1000, place them well within reach of the stacking cable (2 m).
Document Version 2016-03
4.6.3 STACK-S (TDE) Card (KX-NS0132)
Installation Manual 147