Attaching A Ferrite Core - Panasonic KX-TDE110 Installation Manual

3.2 Installation of the PBX
3.2.8

Attaching a Ferrite Core

A ferrite core must be attached when:
• an RJ45 connector is connected to an IPCMPR, IP-GW16 or IP-EXT16 cards, or
• an Amphenol connector is connected to an extension card.
Attaching to an RJ45 Connector
For the IPCMPR Card
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3
cm (1-3/16 in) away from the connector. The ferrite core is included with the PBX.
For IP-GW16/IP-EXT16 Cards
Wrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 5
cm (1-15/16 in) away from the connector. The ferrite core is included with the card.
64 Installation Manual
3 cm
(1-3/16 in)
5 cm
(1-15/16 in)