Stack-S (Ncp) Card (Kx-Ns0131) - Panasonic KX-NS1000 Installation Manual

4.6.2 STACK-S (NCP) Card (KX-NS0131)

Function
A stacking card to be installed in the MPR card slot of a KX-NCP500 or KX-NCP1000 to be used as a legacy
gateway.
Stacking Connector
LED
To STACK-M Card
Accessories and User-supplied Items
Accessories (included): Stacking cable ´ 1
User-supplied (not included): None
WARNING
A lithium battery is used in the STACK-S (NCP) card. There is a risk of explosion if the battery is
replaced with an incorrect type. Dispose of used batteries according to the manufacturer's
instructions.
CAUTION
When installing or removing this card, the power switch must be turned off.
Notice
When stacking other PBXs with the KX-NS1000, place them well within reach of the stacking cable (2 m).
LED Indications
STACK-S (NCP) Card
Indication
CARD STATUS
Document Version 2016-03
Color
Green STACK-S (NCP) card status indication
•
Red STACK-S (NCP) card status indication
•
•
4.6.2 STACK-S (NCP) Card (KX-NS0131)
Description
ON: INS (In Service)
ON: Fault
Flashing: OUS (Out of Service)
Installation Manual 145