Panasonic KX-NS1000 Installation Manual page 236

5.8.1 Assigning IP Addressing Information
Not using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-CS is on a
remote office LAN
All of the IP addressing information must be assigned manually.
To assign the IP addressing information, refer to corresponding manuals for the IP-CS.
If you need to set VLAN parameters, refer to corresponding manuals for the IP-CS.
Note
•
By assigning the PBX's IP address to one IP-CS (KX-NS0154 only), it is possible to assign the PBX's
IP address to other IP-PTs or IP-CSs on the same LAN through system programming. For details, refer
to "9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property—Option—
Announce Mode" in the PC Programming Manual.
236 Installation Manual Document Version 2016-03