Accessing Internal Components; Prevent Esd Damage - Oracle SPARC T5-1B Service Manual

Accessing Internal Components

Related Information
"Remove the Cover" on page 51
■
"Install the Server Module Into the Modular System" on page 100
■
Accessing Internal Components
These topics provide procedures for accessing internal components.
Step
1.
2.
Related Information
"Safety Information" on page 39
■
"Remove the Cover" on page 51
■

Prevent ESD Damage

Caution -
electronics, place components on an antistatic surface, such as an antistatic discharge mat, or
an antistatic bag. Wear an antistatic grounding strap connected to a metal surface on the chassis
when you work on server components.
1. Prepare an antistatic surface to set parts on during the removal, installation, or
replacement process.
Place ESD-sensitive components such as printed circuit boards on an antistatic mat.
2. Attach an antistatic wrist strap.
When handling components, attach an antistatic strap to your wrist and then to a metal area on
the enclosure.
Related Information
"Safety Information" on page 39
■
50 SPARC T5-1B Server Module Service Manual • February 2019
Description
Take antistatic precautions now.
Remove the cover to gain access to the internal
components.
To protect electronic components from ESD, which can permanently damage
Link
"Prevent ESD Damage" on page 50
"Remove the Cover" on page 51