Free Ftp User-Ip; Free Ftp User-Ip Ipv6 - HP FlexFabric 7900 Series Command Reference Manual

mdc-admin
Parameters
username: Specifies a username. You can use the display ftp-user command to display FTP user
information.
Examples
# Release the FTP connections established by using the user account ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP connection? [Y/N]:y
<Sysname>

free ftp user-ip

Use free ftp user-ip to manually release the FTP connections established from a specific IPv4
address.
Syntax
free ftp user-ip ipv4-address [ port port ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv4-address: Specifies the source IP address of an FTP connection. You can use the display
ftp-user command to view the source IP addresses of FTP connections.
port port: Specifies the source port of an FTP connection. You can use the display ftp-user
command to view the source ports of FTP connections.
Examples
# Release the FTP connections established from IP address 192.168.20.184.
<Sysname> free ftp user-ip 192.168.20.184
Are you sure to free FTP connection? [Y/N]:y
<Sysname>

free ftp user-ip ipv6

Use free ftp user-ip ipv6 to manually release the FTP connections established from a specific IPv6
address.
Syntax
free ftp user-ip ipv6 ipv6-address [ port port ]
Views
User view
Predefined user roles
network-admin
mdc-admin
77