Configuration Commit Delay - HP FlexFabric 7900 Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must execute the configuration commit delay command before executing this command.
As a best practice, enable the information center and configure the information center to output logs
to the console. Determine whether to commit the settings depending on the logs. For more
information about the information center, see Network Management and Monitoring Configuration
Guide.
Examples
# Set the allowed delay time to 10 minutes for a manual commit to keep the settings configured
subsequently in effect.
<Sysname> system-view
[Sysname] configuration commit delay 10
# Commit the settings configured after the configuration commit delay command was executed.
[Sysname] configuration commit
# Commit the settings configured after the configuration commit delay command was executed. In
this example, the commit operation fails, because the allowed delay time has expired. The device is
rolling back the configuration to the settings before the configuration commit delay command was
executed.
[Sysname] configuration commit
The system is rolling back configuration. Please wait...

configuration commit delay

Use configuration commit delay to set the allowed delay time for a manual commit to keep the
settings configured subsequently in effect.
Syntax
configuration commit delay delay-time
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
delay-time: Sets the allowed delay time in the range of 1 to 65535 minutes.
Usage guidelines
Configure this command in a single-user environment.
If you do not execute the configuration commit command within the delay time, the device rolls
back the configuration to the settings before the configuration commit delay command was
executed. The device outputs logs to notify the user of the rollback operation. The user cannot
perform other operations before the rollback is finished.
141