Display Telnet Client - HP FlexFabric 7900 Series Command Reference Manual

+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 2 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a
Modem
hyphen (-) is displayed.
# In IRF mode, display summary information about all user lines.
<Sysname> display line summary
Line type : [AUX]
Line type : [VTY]
24:XXXX XXXX XXXX XXXX
40:XXXX XXXX XXXX XXXX
56:XXXX XXXX XXXX XXXX
9 lines used.
63 lines not used.
Table 3 Command output
Fields
number:status

display telnet client

Use display telnet client to display the source IPv4 address or source line configured for the device
to use for outgoing Telnet packets when serving as a Telnet client.
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
0:XUXX XXXX
8:UUXU UUUU UXXX XXXX
(U)
(X)
Description
The number indicates the absolute number of the first user line of the user line class.
The status indicates whether or not the user lines are being used (X for unused and
U for used).
For example, if "0:XUXX XXXX" is displayed, the user line class has eight user lines.
The user lines use the absolute numbers 0 through 7. User line 1 is being used, and
the others are not.
20